Urgent help needed APE MPF1T / P400v
-
- Apista aspirante
- Messaggi: 12
- Iscritto il: 5 dicembre 2017, 16:33
Urgent help needed APE MPF1T / P400v
Hello!
I purchased a MPF1T from France with 122,5cc from 1981 and am trying to register it here in Germany. Unfortunately the vehicle papers have very little information. I contact Piaggio Germany / Netherlands / France / Italy and nobody was useful to help.
The german authorities want the power of the motor. I purchased this document: http://www.vespadoc.com/fr/piaggio-ape- ... mpf1t.html
It has everything else like weight, dimensions, cylinder size, gears etc. but no power.
Where can I get the power of this vehicle? I would greatly appreciate your help.
Regards!
Phillip
I purchased a MPF1T from France with 122,5cc from 1981 and am trying to register it here in Germany. Unfortunately the vehicle papers have very little information. I contact Piaggio Germany / Netherlands / France / Italy and nobody was useful to help.
The german authorities want the power of the motor. I purchased this document: http://www.vespadoc.com/fr/piaggio-ape- ... mpf1t.html
It has everything else like weight, dimensions, cylinder size, gears etc. but no power.
Where can I get the power of this vehicle? I would greatly appreciate your help.
Regards!
Phillip
Re: Urgent help needed APE MPF1T / P400v
Perhaps, you need the "Type-Approval Technical Data Sheets", from Piaggio for 80 Euro:
https://service.piaggiogroup.com/Vintage/richdetail.asp?L=de&B=Vtl.
Here is an example for AD1 model (see to "potenza max effettiva")
https://www.mondoape.com/images/igm-ad1_1.jpg.
https://service.piaggiogroup.com/Vintage/richdetail.asp?L=de&B=Vtl.
Here is an example for AD1 model (see to "potenza max effettiva")
https://www.mondoape.com/images/igm-ad1_1.jpg.
-
- Apista aspirante
- Messaggi: 12
- Iscritto il: 5 dicembre 2017, 16:33
Re: Urgent help needed APE MPF1T / P400v
Thanks! I applied for that but no response :-( I called Piaggio also.mondoape ha scritto:Perhaps, you need the "Type-Approval Technical Data Sheets", from Piaggio for 80 Euro:
https://service.piaggiogroup.com/Vintage/richdetail.asp?L=de&B=Vtl.
Here is an example for AD1 model (see to "potenza max effettiva")
https://www.mondoape.com/images/igm-ad1_1.jpg.
I purchased this document: http://www.vespadoc.com/fr/piaggio-ape- ... mpf1t.html
It has everything apart from the motor power. Your document is also missing the motor power. It only has it as "Potenza fiscale".
Maybe a Vespa with the same 125cc motor?
-
- Apista aspirante
- Messaggi: 12
- Iscritto il: 5 dicembre 2017, 16:33
Re: Urgent help needed APE MPF1T / P400v
The authorities rejected our vehicle. They say we need documents. PLEASE help!
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6143
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: Urgent help needed APE MPF1T / P400v
I have made an inquiry for a Homologation document for the P400V which would show the HP rating for that motor - hang on, waiting for a reply - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
-
- Apista aspirante
- Messaggi: 12
- Iscritto il: 5 dicembre 2017, 16:33
Re: Urgent help needed APE MPF1T / P400v
Wow, you would be our saviour!kjjohnson ha scritto:I have made an inquiry for a Homologation document for the P400V which would show the HP rating for that motor - hang on, waiting for a reply - Ken
Is the MPF1T and the P400v identical? If I search for the MPF1T (as in our vehicle documents) many websites speak about the P400v.
Very beautiful vehicle btw.
Here is ours:
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6143
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: Urgent help needed APE MPF1T / P400v
MPF1T had the shovel fender up front - P400V has the P601 front fender. 125cc for motors in both. I suggest you upgrade using 189cc cylinder head, cylinder and 63mm piston if the wrist pin is the same 16mm - as used in P501 and I can send you a Homologation Document for it but authorities may want original so we wait.
You might contact Frank (tell him Ken sent you) as I bet he has the information you're looking for and a great contact for you. He has 600MP and a 600MPV.
Nice looking Ape you have there - Ken - http://www.wieseundco.de/ -
Identical motor in the MPF and P501 produced for Portugal
You might contact Frank (tell him Ken sent you) as I bet he has the information you're looking for and a great contact for you. He has 600MP and a 600MPV.
Nice looking Ape you have there - Ken - http://www.wieseundco.de/ -
Identical motor in the MPF and P501 produced for Portugal
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
-
- Apista aspirante
- Messaggi: 12
- Iscritto il: 5 dicembre 2017, 16:33
Re: Urgent help needed APE MPF1T / P400v
Thanks for the suggestion! I just emailed Frank. Let's wait and see.kjjohnson ha scritto:MPF1T had the shovel fender up front - P400V has the P601 front fender. 125cc for motors in both. I suggest you upgrade using 189cc cylinder head, cylinder and 63mm piston if the wrist pin is the same 16mm - as used in P501 and I can send you a Homologation Document for it but authorities may want original so we wait.
You might contact Frank (tell him Ken sent you) as I bet he has the information you're looking for and a great contact for you. He has 600MP and a 600MPV.
Nice looking Ape you have there - Ken - http://www.wieseundco.de/ -
Identical motor in the MPF and P501 produced for Portugal
I really hope we didn't just burn a bunch of time and effort with this project. Would be a real shame.
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6143
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: Urgent help needed APE MPF1T / P400v
You can always hand them this Homologation document for MP. You're going to need more horsepower for the Espresso Ape - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
-
- Apista aspirante
- Messaggi: 12
- Iscritto il: 5 dicembre 2017, 16:33
Re: Urgent help needed APE MPF1T / P400v
kjjohnson ha scritto:You can always hand them this Homologation document for MP. You're going to need more horsepower for the Espresso Ape - Ken
Unfortunately that is completely not allowed in Germany. The motor must match the vehicles specifications. Changing the motor is as if you are trying to registered a new vehicle which would require a completely new certification process according to current exhaust laws and cost a heap.
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6143
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: Urgent help needed APE MPF1T / P400v
What is the Homologation number stamped in the vehicle above the serial number? - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
-
- Apista aspirante
- Messaggi: 12
- Iscritto il: 5 dicembre 2017, 16:33
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6143
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: Urgent help needed APE MPF1T / P400v
Homologation number needed is marked in the photo above the serial number - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
-
- Apista aspirante
- Messaggi: 12
- Iscritto il: 5 dicembre 2017, 16:33
Re: Urgent help needed APE MPF1T / P400v
In your case DGM 8113 OM?kjjohnson ha scritto:Homologation number needed is marked in the photo above the serial number - Ken
-
- Apista aspirante
- Messaggi: 12
- Iscritto il: 5 dicembre 2017, 16:33
Re: Urgent help needed APE MPF1T / P400v
Got it! DGM 7281 OM
I will call Piaggio tomorrow and inform them as I applied for the Homologation documents via their website last week. They guy told me today it can take up to 30 days for them to reply but that I am in the system and gave me a customer ID.
Ohh, and Frank told me to ask Jürgen: http://kamm-oldtimer.de/
I will call Piaggio tomorrow and inform them as I applied for the Homologation documents via their website last week. They guy told me today it can take up to 30 days for them to reply but that I am in the system and gave me a customer ID.
Ohh, and Frank told me to ask Jürgen: http://kamm-oldtimer.de/