Sostituzione ammortizzatore anteriore tm 601/703
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6155
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: Sostituzione ammortizzatore anteriore tm 601/703
I will check the measurements on one of my Api today and get back to you - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6155
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: Sostituzione ammortizzatore anteriore tm 601/703
27cm - 24cm seems excessive compression. Mine is 27cm unloaded and 26cm when compressed. Take your camera and a tape measure. Jack up the Ape so the front wheel is off the floor. Put the tip of the tape measure at the top on the outside of the spring so it's against the upper forging and take a measurement down to the top of the cup on the shock absorber that holds the spring in place. This will give you a more accurate measurement.
Then take another measurement with the jack (cric) removed so weight is on the front wheel. Take photos of both measurements so I can see and give me the figures. I will again compare the measurements with mine. Ken
Then take another measurement with the jack (cric) removed so weight is on the front wheel. Take photos of both measurements so I can see and give me the figures. I will again compare the measurements with mine. Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
Re: Sostituzione ammortizzatore anteriore tm 601/703
Ciao ken
ecco foto che mi hai chiesto.
Secondo me ho ammortizzatore molto scarico.
http://imageshack.com/a/img163/5375/q6fr.jpg
http://imageshack.com/a/img802/4813/jbrm.jpg
http://imageshack.com/a/img585/9449/1an7.jpg
http://imageshack.com/a/img13/384/gt8h.jpg
ecco foto che mi hai chiesto.
Secondo me ho ammortizzatore molto scarico.
http://imageshack.com/a/img163/5375/q6fr.jpg
http://imageshack.com/a/img802/4813/jbrm.jpg
http://imageshack.com/a/img585/9449/1an7.jpg
http://imageshack.com/a/img13/384/gt8h.jpg
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6155
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: Sostituzione ammortizzatore anteriore tm 601/703
contact Aniello, he will send you what you need - say hello for me - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
Re: Sostituzione ammortizzatore anteriore tm 601/703
Ciao
Ho avuto il tuo stesso problema sulla sospensione anteriore del mio tm 602.
Io non ho trovato in commercio il modello che hai trovato tu con la R finale sul codice
che significa rinforzato, io ne ho modificato uno nuovo artigianalmente aggiungendo una
boccola sotto la flangia di precarico , come ho già postato , ora l'ape va bene.
Ho avuto il tuo stesso problema sulla sospensione anteriore del mio tm 602.
Io non ho trovato in commercio il modello che hai trovato tu con la R finale sul codice
che significa rinforzato, io ne ho modificato uno nuovo artigianalmente aggiungendo una
boccola sotto la flangia di precarico , come ho già postato , ora l'ape va bene.
Re: Sostituzione ammortizzatore anteriore tm 601/703
Ciao kenkjjohnson ha scritto:contact Aniello, he will send you what you need - say hello for me - Ken
nn riesco più a contattare Aniello , tu sai qualcosa?
Re: Sostituzione ammortizzatore anteriore tm 601/703
Ciao, tutto ok ken................cambiato ammortizatore ora è una favola circolare.
Però mi sa che devo cambiare anche quelli posteriori, è complicato?
Però mi sa che devo cambiare anche quelli posteriori, è complicato?
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6155
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: Sostituzione ammortizzatore anteriore tm 601/703
not complicated, ask GRA, he has the same model Ape and has just gone through this during his restoration - he will help - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
Re: Sostituzione ammortizzatore anteriore tm 601/703
Ciao ,ken.........................aspettermo GRA
Re: Sostituzione ammortizzatore anteriore tm 601/703
ciao
Si certo come dice Ken non è difficile,
basta togliere i coperchietti di protezione sul cassone allentare il dado superiore ,
allentare il bullone di fissaggio sul trapezio , abbassare lo stesso, con ape sollevata e
sfilare l'ammortizzatore con relativo gommone .
Per rimontare fissare prima lo stelo al cassone , sarà più semplice essendo ammortizzatori
a semplice effetto , rientrano molto facilmente, potrebbe essere più difficile fissare prima sul trapezio
saluti
Si certo come dice Ken non è difficile,
basta togliere i coperchietti di protezione sul cassone allentare il dado superiore ,
allentare il bullone di fissaggio sul trapezio , abbassare lo stesso, con ape sollevata e
sfilare l'ammortizzatore con relativo gommone .
Per rimontare fissare prima lo stelo al cassone , sarà più semplice essendo ammortizzatori
a semplice effetto , rientrano molto facilmente, potrebbe essere più difficile fissare prima sul trapezio
saluti
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6155
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: Sostituzione ammortizzatore anteriore tm 601/703
thanks GRA, I'm up to here - no electricity for 5 1/2 hours, ice storm - friend took this photo - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
Re: Sostituzione ammortizzatore anteriore tm 601/703
Ciao GRAGRA ha scritto:ciao
Si certo come dice Ken non è difficile,
basta togliere i coperchietti di protezione sul cassone allentare il dado superiore ,
allentare il bullone di fissaggio sul trapezio , abbassare lo stesso, con ape sollevata e
sfilare l'ammortizzatore con relativo gommone .
Per rimontare fissare prima lo stelo al cassone , sarà più semplice essendo ammortizzatori
a semplice effetto , rientrano molto facilmente, potrebbe essere più difficile fissare prima sul trapezio
saluti
Ma quanto va alzato il mezzo?
Poi mi pareva di aver letto da qualche parte che andava legato (nn mi ricordo più cosa)Per far sì che non uscisse,(forse il semiasse).
ciao
PS ken hai acceso il generatore di corrente ehhhhhhhhhhhhhhh???
Re: Sostituzione ammortizzatore anteriore tm 601/703
Ciao Ken
Certo che dalle tue parti fa molto freddo ! fortuna che le api non hanno il raffreddamento
a liquido!!
tanti auguri di buon Natale
Certo che dalle tue parti fa molto freddo ! fortuna che le api non hanno il raffreddamento
a liquido!!
tanti auguri di buon Natale
Re: Sostituzione ammortizzatore anteriore tm 601/703
Ciao alson
Per sostituire gli ammortizzatori post non serve alzare tanto l'ape,
svitato il dado sopra e fatto scendere lo stelo con un semplice cacciavite basta poco
spazio per farlo uscire .
ciao
Per sostituire gli ammortizzatori post non serve alzare tanto l'ape,
svitato il dado sopra e fatto scendere lo stelo con un semplice cacciavite basta poco
spazio per farlo uscire .
ciao