Yes. The drive gear, the washer in front and behind the drive gear as well as the steel and brass bushings on the crankshaft. Also the clutch must be examined for wear of the clutch plate and proper seating of the springs on assembly.
-
Sì. L'ingranaggio conduttore, la rondella davanti e dietro l'ingranaggio conduttore e le boccole in acciaio e ottone sull'albero motore. Anche la frizione deve essere esaminata per l'usura del disco frizione e il corretto posizionamento delle molle al momento del montaggio.
FRIZIONE APE 501
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6155
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: FRIZIONE APE 501
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
-
- Apista aspirante
- Messaggi: 9
- Iscritto il: 11 dicembre 2021, 12:03
Re: FRIZIONE APE 501
Il rallino spingidisco è diverso dal mio
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6155
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: FRIZIONE APE 501
Il motore nelle foto è un P501 Serie 2 (post maggio 1982) che avevo revisionato. Molto usurato.
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
-
- Apista aspirante
- Messaggi: 9
- Iscritto il: 11 dicembre 2021, 12:03
Re: FRIZIONE APE 501
Ok vedrò cosa posso fare
Re: FRIZIONE APE 501
Buonasera apisti, ho rimontato la frizione al mio P501, poiché quando l'ho acquistato era smontata. Ho acquistato tutti i ricambi nuovi e l'ho montata.
Ora però accade che quando tiro la leva frizione per inserire la prima marcia tende a spengersi......la leva ha il corretto gioco e non noto fili a massa...... potrebbe essere un problema di errato montaggio? Grazie
Ora però accade che quando tiro la leva frizione per inserire la prima marcia tende a spengersi......la leva ha il corretto gioco e non noto fili a massa...... potrebbe essere un problema di errato montaggio? Grazie