ruggine nei spazi vuoti
- olandese volante
- Apista veterano
- Messaggi: 1942
- Iscritto il: 20 maggio 2007, 18:17
- Ape owned: AC3
- Località: olanda/apiro(mc)
ruggine nei spazi vuoti
ho incontrato ruggine nella colonna dietro del tetto.
alora devo cercare un prodotto per fermarla.
spero che uno ha la soluzione.
alora devo cercare un prodotto per fermarla.
spero che uno ha la soluzione.
- aronne
- Apista veterano
- Messaggi: 699
- Iscritto il: 21 aprile 2006, 1:30
- Ape owned: AC3
- Località: LUCCA
Re: ruggine nei spazi vuoti
No, questi due prodotti sono delle cere protettive da mettere sulle parti già verniciate, in particolare nelle giunzioni fra le lamiere
Molte api C e D hanno dei grossi buchi sui montanti del tetto, perchè sono fatti di lamiera scatolata e una volta che ci si infila l'umidità è la fine, perchè ci ristagna e inizia a far marcire tutto
Anch'io ho un buco enorme sul montante. La mia idea era di ripulire l'interno meglio che mi riesce, e poi inondare l'interno di Ferox o di Corroless e dopo che è seccato tappare tutto lo spazio vuoto con stucco metallico, e sopra saldarci un pezzo di lamiera tradizionalmente..
Molte api C e D hanno dei grossi buchi sui montanti del tetto, perchè sono fatti di lamiera scatolata e una volta che ci si infila l'umidità è la fine, perchè ci ristagna e inizia a far marcire tutto
Anch'io ho un buco enorme sul montante. La mia idea era di ripulire l'interno meglio che mi riesce, e poi inondare l'interno di Ferox o di Corroless e dopo che è seccato tappare tutto lo spazio vuoto con stucco metallico, e sopra saldarci un pezzo di lamiera tradizionalmente..
- 3rad
- Apista novizio
- Messaggi: 65
- Iscritto il: 18 marzo 2007, 15:38
- Località: Nuremberg, Allemagne
- Contatta:
Re: ruggine nei spazi vuoti
A well known Problem...
http://www.fertan.com
Or Owatrol Oil for the space between 2 sheets of metal?
There you can find a lot of information:
http://www.korrosionsschutz-depot.de
Do you know Fertan? Or Owatrol Oil for the space between 2 sheets of metal?
There you can find a lot of information:
http://www.korrosionsschutz-depot.de
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6143
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: ruggine nei spazi vuoti
I say old chap, what you need is an English Wheel so you can properly form the patch, cut out the desired area, tack weld the patch in place and then finish weld solid, grind down the welds smooth and get yourself a couple bars of lead and a paddle and lead it smooth as you can. Finish with filler and putty on both sides & you have it! I do not envy you on this job. Find someone who works on Alfa Romeo Giulietta's, they were finished much the same. Looks like the Ape lived in Arkansas where they shoot cars full of bullet holes. Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- olandese volante
- Apista veterano
- Messaggi: 1942
- Iscritto il: 20 maggio 2007, 18:17
- Ape owned: AC3
- Località: olanda/apiro(mc)
Re: ruggine nei spazi vuoti
mi pare che non ho ruggine se guardo la foto di 3 rad.
mi pare che quando e cosi meglio fare una forma di vetroresina e poi fare un tetto nuovo.
risolvo il problema cosi: metto il tetto sotto sopra ,poi chiudo i bugi e faccio il pieno con corroless dopo aver pulito con benzina di lavaggio.
metto un foto del bugo sulla seria del ape mio.
mi pare che quando e cosi meglio fare una forma di vetroresina e poi fare un tetto nuovo.
risolvo il problema cosi: metto il tetto sotto sopra ,poi chiudo i bugi e faccio il pieno con corroless dopo aver pulito con benzina di lavaggio.
metto un foto del bugo sulla seria del ape mio.
- 3rad
- Apista novizio
- Messaggi: 65
- Iscritto il: 18 marzo 2007, 15:38
- Località: Nuremberg, Allemagne
- Contatta:
Re: ruggine nei spazi vuoti
Ken, my plan is to fix it like you wrote, the only right/professional way in my eyes.
Luckily I found another cabin without such big holes, but I want to restore this cabin, too.
Fertan and Owatrol is good to protect parts where no paint is from corrosion, it´s nothing to fix holes.
Ate, i´m not sure if I understood your translated post correctly.
Do you want to fix the holes with glass fiber or do you want to make a glass fiber form of the roof for driving it out of a metal sheet?
Luckily I found another cabin without such big holes, but I want to restore this cabin, too.
Fertan and Owatrol is good to protect parts where no paint is from corrosion, it´s nothing to fix holes.
Ate, i´m not sure if I understood your translated post correctly.
Do you want to fix the holes with glass fiber or do you want to make a glass fiber form of the roof for driving it out of a metal sheet?
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6143
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: ruggine nei spazi vuoti
I'd think about making a plaster mold of the whole upper corner. The inside of the mold can then be smoothed to give the correct contour from the outsides of the mold. Then the metal can be shaped to fit inside the mold (probably after many tries) - keep the mold in case you come across another one in such shape. Find a good cab and make molds of both sides, it seems to be a problem area. Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- 3rad
- Apista novizio
- Messaggi: 65
- Iscritto il: 18 marzo 2007, 15:38
- Località: Nuremberg, Allemagne
- Contatta:
Re: ruggine nei spazi vuoti
Yes, this and the A column are big problem areas at the cabin.
Maybe my cabin is an extreme sample but I think every AC is rusted in this area and often you can´t see how bad it´s rusted. The rear corner of the roof is only the beginning.
The profile over the door is not welded to the roof on the upper side and so water can find the way inside, it goes down the A column, then there is no hole where it can go out. So it makes an hole...
Maybe my cabin is an extreme sample but I think every AC is rusted in this area and often you can´t see how bad it´s rusted. The rear corner of the roof is only the beginning.
The profile over the door is not welded to the roof on the upper side and so water can find the way inside, it goes down the A column, then there is no hole where it can go out. So it makes an hole...
- olandese volante
- Apista veterano
- Messaggi: 1942
- Iscritto il: 20 maggio 2007, 18:17
- Ape owned: AC3
- Località: olanda/apiro(mc)
Re: ruggine nei spazi vuoti
3rad: una forma di vertoresina come modello per fare un altro tetto di ferro o (bella) un tetto di plastica..........
la roba sta saldato anche sopra al tetto con la mia, poi l'aqua puo andare via delle colonne avanti.
aronne: il tetto va benissimo!!!!! hai fatto un gran lavoro.
chiudere i bugi e niente.
la roba sta saldato anche sopra al tetto con la mia, poi l'aqua puo andare via delle colonne avanti.
aronne: il tetto va benissimo!!!!! hai fatto un gran lavoro.
chiudere i bugi e niente.
- olandese volante
- Apista veterano
- Messaggi: 1942
- Iscritto il: 20 maggio 2007, 18:17
- Ape owned: AC3
- Località: olanda/apiro(mc)
Re: ruggine nei spazi vuoti
anche ho solo ruggine leggero ma faccio qualche piccole bugi e metto corroless dentro.............dopo 40-50 anni un po di ruggine ci sta dentro.....
anche il tetto mio e buona, solo un bugo di 1,5x 1,5 cm e bugi fatto con trappano.
anche il tetto mio e buona, solo un bugo di 1,5x 1,5 cm e bugi fatto con trappano.