Leva comando retromarcia P501

[smod]

salve a tutti! - vado al dunque:

mi si è rotta la molla del comando retromarcia, non riesco a capire dov'è il punto di aggancio.... aiuto!

qualcuno puo' darmi qualche dritta? grazie.

allego foto della molla (vecchia e nuova) e del particolare della leva

[kjjohnson]

I'll take a close-up photo to show you and post it when I get back from work today - Ken

[smod]

grazie Ken

[kjjohnson]

Here you go. These photos are from a motor sitting on a stand in my shop that I'm overhauling for a client. The spring is under the dynastarter, that's why it's so hard to see the attachment points, however the dynastarter is off the motor so it's clear. Hook the spring on the motor hole first, make sure it sits against the rubber bumper and then attach it to the reverse lever. You'll need a pair of pliers, maybe two (and wear gloves in case it slips). It takes some doing. I used my phone camera so the pictures are not the best but #43 shows it best without the dynastarter in the way. - good luck Ken

[smod]

eccezzionale , grazie di cuore Ken