La ricerca ha trovato 34 risultati
- 17 aprile 2024, 8:44
- Forum: Il tuo Ape / Your Ape
- Argomento: Il mio Ape / My Ape TM
- Risposte: 0
- Visite : 92
Il mio Ape / My Ape TM
This is my second Ape, my first is an AD1T here . The Ape is a 2006 TM P703V ATM2M Tipper which was for sale just down the road from where I live. IMG_0845.JPG IMG_0846.JPG IMG_0838.jpg IMG_0840.jpg The rear wheels on the Ape are seized so it couldn't be winched onto the trailer, the seller had a fo...
- 18 luglio 2023, 21:14
- Forum: Tecnica / Technics
- Argomento: Torque settings for AD1T
- Risposte: 13
- Visite : 389
Re: Torque settings for AD1T
Thanks
- 15 luglio 2023, 21:41
- Forum: Tecnica / Technics
- Argomento: Torque settings for AD1T
- Risposte: 13
- Visite : 389
Re: Torque settings for AD1T
Hi,
Could I check that the AD1T does not have a head gasket?
Regards
James
Could I check that the AD1T does not have a head gasket?
Regards
James
- 12 luglio 2023, 8:42
- Forum: Tecnica / Technics
- Argomento: Torque settings for AD1T
- Risposte: 13
- Visite : 389
- 10 luglio 2023, 16:38
- Forum: Tecnica / Technics
- Argomento: Torque settings for AD1T
- Risposte: 13
- Visite : 389
Re: Torque settings for AD1T
Many thanks for the replies.
Ken it looks from you document that the head bolts should be torqued to 1.7 - 2.2 Kgm (dado fissaggio testa ciindro) 16.6NM - 21.5NM
Regards
James
Ken it looks from you document that the head bolts should be torqued to 1.7 - 2.2 Kgm (dado fissaggio testa ciindro) 16.6NM - 21.5NM
Regards
James
- 8 luglio 2023, 15:02
- Forum: Tecnica / Technics
- Argomento: Torque settings for AD1T
- Risposte: 13
- Visite : 389
Torque settings for AD1T
Hi,
I am trying to find the torque setting for the head bolts on my AD1T engine. Can anyone help?
Regards
James
I am trying to find the torque setting for the head bolts on my AD1T engine. Can anyone help?
Regards
James
- 28 giugno 2023, 12:04
- Forum: Il tuo Ape / Your Ape
- Argomento: My 1966 AD1T
- Risposte: 24
- Visite : 2000
Re: My 1966 AD1T
Another update! Over the winter I have cleaned the engine bay and matt lacquered it IMG_8902.jpg IMG_8979.jpg I ordered new engine bearing, oil seals, gaskets and clutch ready for the rebuild. The only parts I might still need are piston rings and a piston. IMG_9198.jpg IMG_9199.jpg IMG_9201.jpg The...
- 28 ottobre 2022, 14:32
- Forum: Il tuo Ape / Your Ape
- Argomento: My 1966 AD1T
- Risposte: 24
- Visite : 2000
Re: My 1966 AD1T
I haven't posted for a good while due to fixing the Ape's trailer and working on the house laying flooring etc. Trailer before https://www.mondoape.com/apepiaggio/download/file.php?id=25108&t=1 Trailer after new rear lights and a coat of paint B-) IMG_8611.jpg Now I have a little more time I can...
- 4 giugno 2022, 23:27
- Forum: Il tuo Ape / Your Ape
- Argomento: My 1966 AD1T
- Risposte: 24
- Visite : 2000
Re: My 1966 AD1T
Rear brakes I ordered some rear brake shoes from Juergen Kamm.GaLabau@t-online.de £54.00 IMG_8433.jpg These are unbranded, the 'meat' on the shoes is 7mm thick. The old pads below still had meat on them, about 4mm, but it looks like there are three different brands of pad on the rear, if you look at...
- 4 giugno 2022, 10:34
- Forum: Il tuo Ape / Your Ape
- Argomento: My 1966 AD1T
- Risposte: 24
- Visite : 2000
Re: My 1966 AD1T
A lot has happened over the last few weeks F<) Smallwood Vintage Rally - https://www.smallwoodvintagerally.co.uk The Ape went to it's first show just down the road from where I live, it's the first time I have been and it was a lot bigger than I thought! There were lots and lots of vintage tractors,...
- 4 giugno 2022, 10:06
- Forum: Il tuo Ape / Your Ape
- Argomento: My 1966 AD1T
- Risposte: 24
- Visite : 2000
Re: My 1966 AD1T
Ok, I think found it, it is this one: Immagine 2022-05-20 151047.jpg I phoned an official Piaggio reseller just now and it sadly confirms that part does not exists anymore. But, you may be lucky: if you are willing to share the exact measures of the one you dismounted I'll call again and will let y...
- 20 maggio 2022, 10:47
- Forum: Il tuo Ape / Your Ape
- Argomento: My 1966 AD1T
- Risposte: 24
- Visite : 2000
Re: My 1966 AD1T
@MarioNYC - The battery tray is wider than the original, I am trying to source a 6v gel battery like the original but it's proving hard work, for the moment I am using a motorbike battery cable tied down! I've checked the manual and I cannot find any adjustment mechanism on the rear brakes, which is...
- 19 maggio 2022, 9:38
- Forum: Il tuo Ape / Your Ape
- Argomento: My 1966 AD1T
- Risposte: 24
- Visite : 2000
Re: My 1966 AD1T
With the weather being dry for once I took the Ape for a drive round where I live, in total I covered about 5 miles F<) She drove well and put quite a few smiles on peoples faces as I zipped passed. I called to get some petrol £1.65 per litre :(( IMG_8372.jpg The next job on my list was to fit the n...
- 6 maggio 2022, 9:01
- Forum: Il tuo Ape / Your Ape
- Argomento: My 1966 AD1T
- Risposte: 24
- Visite : 2000
Re: My 1966 AD1T
Another update...... I am trying to keep up with the parcels which keep arriving, yesterday three parcels turned up :D As I mentioned in my last post although the Ape runs a lot better it's still hard to start, there is a lack of fuel which starting (the plug is dry) so I called Eurocarb http://www....
- 3 maggio 2022, 23:01
- Forum: Il tuo Ape / Your Ape
- Argomento: My 1966 AD1T
- Risposte: 24
- Visite : 2000
Re: My 1966 AD1T
Progress update I've fitted all the new cables now, they were quite quick to thread through the frame if you use the other cable as a draw-cable attaching the old and new cables together end-to-end with gaffer tape B-) The gear cables were a little trick to adjust, the gears are a little hit and mis...