Thanks.
After some filing I managed to remove the rivets and replaced with nut and bolts, so managed to avoid removing the hub!
La ricerca ha trovato 7 risultati
- 15 settembre 2022, 10:51
- Forum: Tecnica / Technics
- Argomento: / Perno della piastra posteriore del freno rotto P601
- Risposte: 2
- Visite : 1123
- 12 settembre 2022, 16:51
- Forum: Tecnica / Technics
- Argomento: / Perno della piastra posteriore del freno rotto P601
- Risposte: 2
- Visite : 1123
/ Perno della piastra posteriore del freno rotto P601
After experiencing a very long brake pedal and poor handbrake performance I inspected the rear brakes to find that the pivot block is loose on the backplate, which had allowed the brake shoe to slip into the gap - hence the brake problem. I assume the plates are supposed to be riveted in place which...
- 13 luglio 2021, 21:07
- Forum: Tecnica / Technics
- Argomento: P601 problema del cambio
- Risposte: 5
- Visite : 934
Re: P601 problema del cambio
Thank you Ken. I will order a new clutch/bushes etc and then on the next rainy day (shouldn’t have to wait too long in the UK!!) I’ll see if I can remove the clutch and get to the bottom of the problem. I also changed the oil again today putting in SAE 40 in place of the 10w40 and i think it’s made ...
- 13 luglio 2021, 13:40
- Forum: Tecnica / Technics
- Argomento: P601 problema del cambio
- Risposte: 5
- Visite : 934
Re: P601 problema del cambio
Thank you Ken. I checked it this morning as you advised and the gearchange seemed ok by just operating the rod directly, I then took the gear control housing off and checked the bolt to see if it was loose (thanks for the tip on making sure I turned it anti-clockwise). It seemed to be tight. The rod...
- 12 luglio 2021, 11:42
- Forum: Tecnica / Technics
- Argomento: P601 problema del cambio
- Risposte: 5
- Visite : 934
P601 problema del cambio
Ho un problema con il mio P601. La possiedo da 12 mesi e ha sempre avuto un cambio "goffo" - quando innesto la 1a marcia con la frizione a fondo fa sobbalzare leggermente l'auto (non abbastanza per spostarla in avanti ma solo una piccola scossa) e quando cambio marcia in 2a, 3a, 4a sento u...
- 30 novembre 2020, 19:13
- Forum: Tecnica / Technics
- Argomento: Driveshaft Couplings - close to disaster
- Risposte: 3
- Visite : 981
Re: Driveshaft Couplings - close to disaster
Thank you Ken. Your photo guide is very helpful and a great benefit for Ape newcomers - the workshop/service manuals are good on some things but miss many of practical the hints and tips you’d get with say a Haynes manual. Your guide is a terrific piece of work - much appreciated 👍 So far I’ve decok...
- 28 novembre 2020, 18:57
- Forum: Tecnica / Technics
- Argomento: Driveshaft Couplings - close to disaster
- Risposte: 3
- Visite : 981
Driveshaft Couplings - close to disaster
I bought my p601 in the summer and have been using it as a working/hobby vehicle. The latest job has been transporting logs across fields and up some steep inclines by road - probably 20 loads. I knew the flexible couplings needed replacing and had ordered some new ones from Italy which arrived yest...