Api di Ken

Inserisci le foto e le informazioni del tuo motoveicolo d'epoca (solo anni '50, '60 e '70) / Add you vehicle's photos and info ('50, '60 and '70 only)
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

Fine sand or glass beads - you cannot restore without the use of one of these. Heavier work done by sandblasting. This is where I found the P501 after a fire and the owner told me to take it away or it was going to recyclers - Ken
DSC07319.JPG
kenjvespa014dl7.jpg
Tremclad Clear protects the finish
DSC05294.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

L()
1 newest photos 144.JPG
1 newest photos 166.JPG
1 newest photos 167.JPG
001.JPG
dinamotore
1 newest photos 154.JPG
1 newest photos 155.JPG
1 newest photos 157.JPG
Starter turns over :)>-
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
Luca88SD
Apista esperto
Apista esperto
Messaggi: 228
Iscritto il: 28 ottobre 2013, 20:46
Località: Siurgus Donigala (CA)
Contatta:

Re: Api di Ken

Messaggio da Luca88SD »

Ottimo lavoro Ken :) ti seguo sempre :)
Avatar utente
giambattista
Apista aspirante
Messaggi: 24
Iscritto il: 14 luglio 2014, 13:10

Re: Api di Ken

Messaggio da giambattista »

You are the number one
always very interesting

L_K*
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

Remove the fan using my 'puller'
1 newest photos 165.JPG
1 newest photos 168.JPG
1 newest photos 169.JPG
sandblasted, primed and drums painted 'aluminum'
001.JPG
002.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
Luca88SD
Apista esperto
Apista esperto
Messaggi: 228
Iscritto il: 28 ottobre 2013, 20:46
Località: Siurgus Donigala (CA)
Contatta:

Re: Api di Ken

Messaggio da Luca88SD »

dopo che carteggi i pezzi per rimuovere la ruggine che cosa stai applicando? un prodotto come il Rimox?
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

Una volta sabbiato prima Epoxy Primer e poi verniciatura antiruggine - qui è Tremclad - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

First you sandblast the part so it's clean and free of rust
078.jpg
079.jpg
Take things apart, media blast after plugging the holes then coat with Tremclad Clear to protect the finish
1 newest photos 151.JPG
1 newest photos 152.JPG
1 newest photos 153.JPG
V(*
pulley and motor fans.JPG
V(*Two fuel tanks to make one good tank
P501 cleaned fuel tank.JPG
V(*
P501 tank painted.JPG
V(*
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

L()
175 cooling shroud.JPG
176 varsol clean.JPG
177 media blasted.JPG
178 overhauled.JPG
Dinamotore cleaned, one bearing replaced, tested OK :)>-
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
Luca88SD
Apista esperto
Apista esperto
Messaggi: 228
Iscritto il: 28 ottobre 2013, 20:46
Località: Siurgus Donigala (CA)
Contatta:

Re: Api di Ken

Messaggio da Luca88SD »

Ottimo lavoro Ken, per i ricambi del dinamotore hai avuto problemi??
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

No problems for the required part, a bearing. The shop had one in stock. I'd taken new brushes for the dinamotore but the old ones were hardly worn so they weren't replaced. Everything cleaned up and tested. Couldn't believe my good luck when you see what the dinamotore looked like when I pulled the motor. Ken

Nessun problema per la parte necessaria, un cuscinetto. Il negozio aveva uno in magazzino. Avevo preso nuovi pennelli per il dinamotore ma quelli vecchi erano appena indossato in modo che non sono stati sostituiti. Tutto pulito e testato. Non potevo credere ai miei buona fortuna quando si vede ciò che il dinamotore sembrava quando ho tirato il motore. Ken
1 newest photos 085.JPG
\:D/
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

L()
179 clear coat.JPG
broken motor mount removal T(-
180.JPG
181.JPG
182.JPG
183.JPG
Grind the weld, punch out the bolt save the washer
184.JPG
New motor mount :)>-
185.JPG
Mount the motor on the test stand for overhaul
186.JPG
Someone passing by
snapping turtle 1.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

P501 restoration L()
187.JPG
melted cooling shroud
188.JPG
motor number
190.JPG
cleaning
191.JPG
cylinder head
192.JPG
cylinder - piston exposed
193.JPG
candle - spark plug
194.JPG
remove cylinder, expose piston
195.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

Ape P501 pianale restoration L()
196.JPG
197.JPG
198.JPG
199.JPG
200.JPG
201.JPG
202.JPG
203.JPG
204.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6143
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

Ape P501 pianale restoration L()
205.JPG
206.JPG
207.JPG
208.JPG
209.JPG
210.JPG
211.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Rispondi