Dear Ape fellows,
How could I remove crankcase from gearbox? I have opened big nut under cylinder and two bolts above gear cover. Is there some other bolts I should open, or could it be only stucked?
Thanks in advance, Max
AC4 motor remove
Re: AC4 motor remove
Do you mean the differential from the engine?
https://www.mondoape.com/apepiaggio/vie ... ?f=6&t=770
https://www.mondoape.com/apepiaggio/vie ... 7&start=15
https://www.mondoape.com/apepiaggio/vie ... ?f=6&t=770
https://www.mondoape.com/apepiaggio/vie ... 7&start=15
Re: AC4 motor remove
No, I mean the part where cylinder and kick star is from the part where clutch is.
-
- Apista veterano
- Messaggi: 791
- Iscritto il: 27 settembre 2010, 23:08
- Ape owned: AC1
Re: AC4 motor remove
hi there will probably be an oxide between engine and differential. try with a lever between engine and differential
Re: AC4 motor remove
Thank you. I sprayed lot of CRC and will try again tomorrow.
-
- Apista veterano
- Messaggi: 791
- Iscritto il: 27 settembre 2010, 23:08
- Ape owned: AC1
Re: AC4 motor remove
once the two bolts have been unscrewed, the engine turns
Re: AC4 motor remove
It was very tight, but I did it. Engine is on table, and rebuilding can start. Thank you for your help!