Api di Ken
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6147
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: api di ken
No, she's still recovering from surgery. The fourth person to lift it on is me, and I'm the one taking the photos. Must turn the camera around one day. Some foam insulating tape under the lip and the front of the pianale bed. When you have problems installing a nut onto a bolt in a very tight spot, I use double sided Carpet Tape and cut a small square and stick the nut to the tape and the tape onto the end of my finger (either side depending on location). Instead of installing (or trying to) a lockwasher I often use nuts with serrated washers attached. Works real slick in tight places! And yes, I'll touch up that spot on the pianale lock. Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6147
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: api di ken
Advertised for 12,000 euros - a P601 from Sicily - Look at the floor! Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6147
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: api di ken
OK kids - here she is - "Sweet Pea". The topper is mounted. The black pieces on the upright posts are Industrial Strength Velcro which I used as a fastener for the three doors. No sense putting locks on it because the Pianale bed sides and tailgate can be unfastened. The props to hold up the three doors are aluminum rod which sit in holes drilled in the uprights and the doors are hinged with aluminum piano hinges. I have to clean up the aluminum and then the logo's can be put on. Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6147
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: api di ken
A personal touch - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- olandese volante
- Apista veterano
- Messaggi: 1942
- Iscritto il: 20 maggio 2007, 18:17
- Ape owned: AC3
- Località: olanda/apiro(mc)
Re: api di ken
about time..............
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6147
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: api di ken
Yes, yes, you with the smiling face. One door logo on tonight but the Master is coming tomorrow or Friday to put all the rest of the logo's on. (the Master is Pete and this is where they came from). I had a short drive around the subdivision behind us and how appropriate one of the streets is named "Sweetgrass Street". Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
Re: api di ken
Da vero bella!!!!!!!!!
Ciao sapresti dirmi se il cassone dell'ape 501 si può smontare ?
Se si come???????
Ciao sapresti dirmi se il cassone dell'ape 501 si può smontare ?
Se si come???????
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6147
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: api di ken
6 bolts, two on each side on the pianale bed and two on the uprights at the front of the pianale bed. Undo those 6 bolts and lift it off. I used the bolt holes for the front spars on each side which hold the pianale bed to the frame. The only new holes are behind the corners of the front upright panel and they're hidden from view. Here are some more photos showing how it's attached. Ken
Ultima modifica di kjjohnson il 11 settembre 2009, 3:04, modificato 2 volte in totale.
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- zamik
- Apista veterano
- Messaggi: 376
- Iscritto il: 4 maggio 2005, 19:47
- Ape owned: AC2
- Località: Chievo - Verona
- Contatta:
Re: api di ken
si che si può smontare, bisogna levare i bulloni che lo tengono ataccato ai longheroni. Se guardi da sotto il pianale vedrai delle sbarre tenute da viti e bulloni che fissano il pianale ai longheroni. allego tavole del catalogo p.r.
Re: api di ken
Magiciiii tutti e due grazie per le vostre risposte........
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6147
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: api di ken
The second "topper" is going to Toronto and I'm to mount it on their Vespacar P501. You can see it on their website, it's MPR2T+25088+ - http://www.olliffe.ca/ - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- olandese volante
- Apista veterano
- Messaggi: 1942
- Iscritto il: 20 maggio 2007, 18:17
- Ape owned: AC3
- Località: olanda/apiro(mc)
Re: api di ken
but when are the api with (maple leaf)pianale kits appearing?
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6147
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: api di ken
That would be at the opening of Hockey season! - you make me giggle and I thank you for that. Things still pretty tough around home, very slow recovery. Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6147
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: api di ken
A friend has advised me that in the .pdf file on my website "Catalogo delle parti di ricambio P2'' I seem to be missing pages 57 and 58. I wonder if someone who has this Manual can provide me with copies of these two pages so I can correct the file. grazie, Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- olandese volante
- Apista veterano
- Messaggi: 1942
- Iscritto il: 20 maggio 2007, 18:17
- Ape owned: AC3
- Località: olanda/apiro(mc)
Re: api di ken
nurnberg ........