Ciao a tutti dopo molto tempo sono riuscito a tornare sul sito e vorrei mostrarvi le foto del mio se pur misero passo avanti con il lavoro sul motore
vi allego poi delle foto con una serie di domande su alcuni punti che non sono riuscito a risolvere
arrivederci
apecar P2 proseguo lavori.....
- giambattista
- Apista aspirante
- Messaggi: 24
- Iscritto il: 14 luglio 2014, 13:10
- giambattista
- Apista aspirante
- Messaggi: 24
- Iscritto il: 14 luglio 2014, 13:10
Re: apecar P2 proseguo lavori.....
DOMANDA:qual'è la posizione corretta dello statore?ho posizionato lo statore in quella posizione perchè mi sembrava la più logica per via del cavo elettrico.
ho comprato questo statore versione nuova su e-bay compatibile APACAR P2 ma non ho fatto caso che non è simile a quello vecchio a cui c'è una specie di condensatore che non vedo nella versione nuova
vi ringrazio anticipatamente
ho comprato questo statore versione nuova su e-bay compatibile APACAR P2 ma non ho fatto caso che non è simile a quello vecchio a cui c'è una specie di condensatore che non vedo nella versione nuova
vi ringrazio anticipatamente
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6145
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: apecar P2 proseguo lavori.....
P2 Israel - Ken -
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- giambattista
- Apista aspirante
- Messaggi: 24
- Iscritto il: 14 luglio 2014, 13:10
Re: apecar P2 proseguo lavori.....
thank you kjjohnson, the position of the "stator" seems correct
you are the best....
you are the best....
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6145
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: apecar P2 proseguo lavori.....
then why can't I find that rubber bumper for the rear fender on my P2? - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/
- giambattista
- Apista aspirante
- Messaggi: 24
- Iscritto il: 14 luglio 2014, 13:10
Re: apecar P2 proseguo lavori.....
you are steel number one....
cheek this out:
http://www.ebay.it/itm/253130-PARASPRUZ ... 5d448f3000
http://www.ebay.it/itm/253130-PARASPRUZ ... 5d448f3000
best regards
cheek this out:
http://www.ebay.it/itm/253130-PARASPRUZ ... 5d448f3000
http://www.ebay.it/itm/253130-PARASPRUZ ... 5d448f3000
best regards
- giambattista
- Apista aspirante
- Messaggi: 24
- Iscritto il: 14 luglio 2014, 13:10
- kjjohnson
- 1° Apista restauratore
- Messaggi: 6145
- Iscritto il: 3 dicembre 2007, 11:17
- Ape owned: MPR2
- Località: Bayfield, Ontario, Canada
- Contatta:
Re: apecar P2 proseguo lavori.....
I have new paraspruzzi that I haven't installed yet - this is the little rubber fender bumper I need - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
http://www.kjjohnson.ca/