Mondoape.com

This is the same with my AD1T, I've just ordered a new coil, points, and condenser.

Ciao,

Can anyone recommend Ape part shops in Sicily? I am traveling from Messina to Palermo and around the south of the island.

Regards
James

I have finished the tailgate for the moment - I will respray the whole tailgate at some point. IMG_0909.jpg I've ordered some new part. Rear section of the handbrake cable IMG_0910.jpg Reverse cable IMG_0911.jpg Accelerator cable both sections IMG_0912.jpg Choke cable IMG_0913.jpg Clutch cable IMG ...

I found the cause of the seized rear wheels, both rear brakes were completely rusted solid. I removed all the braking components and reassembled the hubs so the Ape could be moved around. IMG_0866.jpg IMG_0869.jpg IMG_0874.jpg I gave the chassis a good clean IMG_0880.jpg A the tipper tailgate was ...

Over the last year, I have not done much work on the Ape as I have moved house. However the Ape is due to go to the local vintage fair in May so I have given her a clean. I have bought a new registration plate for the Apr from https://www.targhestoriche.it/prodotti/ An Italian registration plate ...

This is my second Ape, my first is an AD1T here . The Ape is a 2006 TM P703V ATM2M Tipper which was for sale just down the road from where I live. IMG_0845.JPG IMG_0846.JPG IMG_0838.jpg IMG_0840.jpg The rear wheels on the Ape are seized so it couldn't be winched onto the trailer, the seller had a ...

Thanks

Hi,

Could I check that the AD1T does not have a head gasket?

Regards
James

kjjohnson ha scritto: ↑10 luglio 2023, 17:47 DO NOT use a ratchet gun, use a torque wrench! Ken

I won't use the 1" socket set either

Thanks for the help

Many thanks for the replies.

Ken it looks from you document that the head bolts should be torqued to 1.7 - 2.2 Kgm (dado fissaggio testa ciindro) 16.6NM - 21.5NM

Regards
James

Hi,

I am trying to find the torque setting for the head bolts on my AD1T engine. Can anyone help?

Regards
James

Another update! Over the winter I have cleaned the engine bay and matt lacquered it IMG_8902.jpg IMG_8979.jpg I ordered new engine bearing, oil seals, gaskets and clutch ready for the rebuild. The only parts I might still need are piston rings and a piston. IMG_9198.jpg IMG_9199.jpg IMG_9201.jpg The ...

I haven't posted for a good while due to fixing the Ape's trailer and working on the house laying flooring etc. Trailer before https://www.mondoape.com/apepiaggio/download/file.php?id=25108&t=1 Trailer after new rear lights and a coat of paint B-) IMG_8611.jpg Now I have a little more time I can now ...

Rear brakes I ordered some rear brake shoes from Juergen Kamm.GaLabau@t-online.de £54.00 IMG_8433.jpg These are unbranded, the 'meat' on the shoes is 7mm thick. The old pads below still had meat on them, about 4mm, but it looks like there are three different brands of pad on the rear, if you look at ...

A lot has happened over the last few weeks F<) Smallwood Vintage Rally - https://www.smallwoodvintagerally.co.uk The Ape went to it's first show just down the road from where I live, it's the first time I have been and it was a lot bigger than I thought! There were lots and lots of vintage tractors ...