Pagina 146 di 171
Re: Api di Ken
Inviato: 14 ottobre 2019, 18:14
da kjjohnson
Re: Api di Ken
Inviato: 19 ottobre 2019, 0:53
da kjjohnson
VESPACAMERA P400V - FRANCE - I've helped Thibaut with his restoration and now on tour - Ken -
https://vimeo.com/364692816 -
VESPACAMERA ON THE ROAD AGAIN
Re: Api di Ken
Inviato: 23 ottobre 2019, 18:00
da kjjohnson
Re: Api di Ken
Inviato: 25 ottobre 2019, 1:11
da kjjohnson
If you pray, say a prayer for my mother Cecelia
-
Se preghi, dì una preghiera per mia madre Cecelia
Quando vedo questo albero penso a mia madre
Re: Api di Ken
Inviato: 25 ottobre 2019, 1:45
da mondoape
Heartfelt condolences ! Your mother inspires so much affection. I will say a prayer for her.
A big hug.
Re: Api di Ken
Inviato: 26 ottobre 2019, 19:42
da MarioNYC
So sorry to hear of her loss Ken.
Re: Api di Ken
Inviato: 29 ottobre 2019, 18:01
da kjjohnson
POLICE APE AD1T - now to see if I can get this motor fired up on the test stand - Ken -
https://www.kjjohnson.ca/piaggio/POLICE%20APE%20AD1T/ -
Re: Api di Ken
Inviato: 30 ottobre 2019, 12:41
da kjjohnson
Re: Api di Ken
Inviato: 2 novembre 2019, 0:52
da kjjohnson
POLICE APE AD1T
Once cooling fan is installed final points adjustment can only be made through the holes in the cooling fan behind the dust cap - Ken -
https://www.kjjohnson.ca/piaggio/POLICE%20APE%20AD1T/ -
Re: Api di Ken
Inviato: 3 novembre 2019, 22:15
da kjjohnson
Re: Api di Ken
Inviato: 9 novembre 2019, 18:19
da kjjohnson
POLICE APE AD1T With two mechanic friends we managed to fire up the motor but only for a moment. Smoke and fuel/oil mix coming out of places not intended! We discovered a Mud Dauber clay nest in the exhaust pipe, blocking it and creating back pressure. Oil/fuel mix came out under the cylinder around the gasket! Take the motor apart and replace the gasket, clean the exhaust pipe and reset the timing. Put it all back together so I can make another attempt to start it without problems hopefully next time - Ken
-
Con due amici meccanici siamo riusciti ad accendere il motore, ma solo per un momento. Fumo e miscela di carburante / olio che escono da luoghi non previsti! Abbiamo scoperto un nido di argilla Mud Dauber nel tubo di scarico, bloccandolo e creando contropressione. La miscela olio / carburante fuoriesce sotto il cilindro attorno alla guarnizione! Smontare il motore e sostituire la guarnizione, pulire il tubo di scarico e ripristinare i tempi. Rimetti tutto insieme in modo da poter fare un altro tentativo di avviarlo senza problemi, la prossima volta -
Some advice from Pitt -
https://www.kjjohnson.ca/piaggio/POLICE%20APE%20AD1T/ -
Re: Api di Ken
Inviato: 10 novembre 2019, 21:46
da kjjohnson
ROSA was at a dinner party last night - Ken
Re: Api di Ken
Inviato: 10 novembre 2019, 22:43
da mondoape
Very nice!
Re: Api di Ken
Inviato: 12 novembre 2019, 13:07
da kjjohnson
Snow in Bayfield - Neve a Bayfield - Ken
Re: Api di Ken
Inviato: 15 novembre 2019, 0:52
da kjjohnson