Mondoape.com

Dear Ape fellows,
How could I remove crankcase from gearbox? I have opened big nut under cylinder and two bolts above gear cover. Is there some other bolts I should open, or could it be only stucked?
Thanks in advance, Max

Do you mean the differential from the engine?

https://www.mondoape.com/apepiaggio/vie ... ?f=6&t=770
https://www.mondoape.com/apepiaggio/vie ... 7&start=15

No, I mean the part where cylinder and kick star is from the part where clutch is.

hi there will probably be an oxide between engine and differential. try with a lever between engine and differential

Thank you. I sprayed lot of CRC and will try again tomorrow.

once the two bolts have been unscrewed, the engine turns

It was very tight, but I did it. Engine is on table, and rebuilding can start. Thank you for your help!