FRIZIONE APE 501

Quesiti tecnici riguardanti l'Ape anni '50, '60 e '70 (telai A, B, C, D, E, MP) / Technical questions about Ape in the fifties, sixties and seventies (A, B, C, D, E, MP chassis).
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: FRIZIONE APE 501

Messaggio da kjjohnson »

Yes. The drive gear, the washer in front and behind the drive gear as well as the steel and brass bushings on the crankshaft. Also the clutch must be examined for wear of the clutch plate and proper seating of the springs on assembly.
-
Sì. L'ingranaggio conduttore, la rondella davanti e dietro l'ingranaggio conduttore e le boccole in acciaio e ottone sull'albero motore. Anche la frizione deve essere esaminata per l'usura del disco frizione e il corretto posizionamento delle molle al momento del montaggio.
IMG_5680.jpg
IMG_5764.jpg
IMG_5704.jpg
IMG_5685 - Copy.JPG
^&$
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
lucianomandrici
Apista aspirante
Messaggi: 9
Iscritto il: 11 dicembre 2021, 12:03

Re: FRIZIONE APE 501

Messaggio da lucianomandrici »

Il rallino spingidisco è diverso dal mio
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: FRIZIONE APE 501

Messaggio da kjjohnson »

Il motore nelle foto è un P501 Serie 2 (post maggio 1982) che avevo revisionato. Molto usurato.
IMG_5957.jpg
^&$
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
lucianomandrici
Apista aspirante
Messaggi: 9
Iscritto il: 11 dicembre 2021, 12:03

Re: FRIZIONE APE 501

Messaggio da lucianomandrici »

Ok vedrò cosa posso fare
Rispondi