Mondoape.com

Hi Ken,
Problem solved thanks,i've mounted the cylinder and the head so i've started mine ape, started on the first try but after first gas turn it remain accellerated,can you help me???
I didn't clean the carburetor could this be the problem??or i'm totally wrong??The new exhaust isn't arrived again so i've mounted the old one.
Let me know
Thanks

Hi Ken,
This morning i have both the accelerator cable for change after clean the carburator but before make this i've started mine ape and the problem isn't appeared again so I've adjusted the vire the minimum and always acts go well I'll let you know in the meantime I put some pictures of the work ....

I've had some problem with photo upload so i finally add some of my work...what do you think about??

Ken finally i've posted some photos..r..soon i will finish the restauration work and put other photos
Bye

Hello Ken,
Fortunately the rust on the floor wasn't so heavy, I've only filled and passed a coat of rust,because the work that was done by the previous owner was a little rough.
So now i must re-paint the lower side of the floor with high solid protection coating.
I put a new photo of the wornk in progress.. thanks for your support and photos.

Hi Ken,
Ok i'll do the things you suggested

Hi Ken,
I'm was stopped a few days for the bad weather,so this morning i've tried to dismantle the pump tube from the brake pump,but unfortunatly i didn't succeed,do you have any suggest for dismantle?
Thanks

Segui il consiglio di Ken. Nel caso tu non riesca puoi provare con una chiave specifica per l'uso di cui allego due foto.

Hi Ken,
I've tryed with lubricant and a bit of heat but nothing...so i've put more lubicant and now i'm wait....

Salve Mondoape,
Grazie per la risposta e la foto della chiave potrebbe dirmi anche dove posso trovarla e se ha un nome specifico???

Ciao MasMaster, se per te va bene diamoci del tu. Ho dato uno sguardo su Leroy Merlin ma niente. Allora vai su www.ebay.it e cerca le seguenti parole: "chiave tubi freno". Ne escono tante. Devi scegliere quella del numero giusto e soprattutto di buona qualità. Se il dado è un po rovinato e la chiave non entra puoi limare le smussature con una limetta. Un alternativa può essere un negozio fornito di articoli di utensileria, o un meccanico che te la presti. Buon lavoro!

Salve Mondoape,
Innanzitutto grazie per la rapida risposta, per me va bene darsi del tu non conoscendo sono sempre formale di solito....farò questa ricerca grazie ancora per la dritta.A buon rendere