Pagina 1 di 1
APE CAR P3
Inviato: 22 maggio 2014, 20:37
da CORRADO
Re: APE CAR P3
Inviato: 23 maggio 2014, 11:29
da mondoape
Re: APE CAR P3
Inviato: 23 maggio 2014, 14:28
da CORRADO
Re: APE CAR P3
Inviato: 27 maggio 2014, 20:57
da CORRADO
Re: APE CAR P3
Inviato: 28 maggio 2014, 13:11
da kjjohnson
It will be one of two things, either electrical or fuel problems. Considering the age and use of the P3 ( we cannot see because you have not posted photos ) the first thing to try is to remove the bowl at the base of the carburetor. Remove the pin from the fuel float and then remove the carburetor needle and examine it for wear. Buy yourself a can of spray carburetor cleaner and clean the main jet and the needle. There is also a screen filter behind the fuel inlet into the carburetor and this should be removed and cleaned. It may be quite dirty in there which affects fuel flow, especially at idle.
Time is money, sometimes it's wiser to hire a proper mechanic to fix the problem, it will cause less harm to your nerves although it may lighten your pocketbook. Ken
Sarà una delle due cose, sia problemi elettrici o di carburante. Considerando l'età e l'uso della P3 (che non possiamo vedere perché non avete pubblicato foto), la prima cosa da provare è quello di rimuovere la ciotola alla base del carburatore. Rimuovere il perno dal galleggiante del carburante e poi rimuovere l'ago carburatore ed esaminare lo stato di usura. Comprati una bomboletta di detergente carburatore spray e pulire il getto principale e l'ago. Vi è anche un filtro schermo dietro l'ingresso del carburante nel carburatore e questo dovrebbe essere rimosso e pulito. Può essere molto sporco in là che colpisce il flusso del combustibile, soprattutto in idle.
Il tempo è denaro, a volte è più saggio assumere una corretta meccanico per risolvere il problema, causerà meno danni ai nervi anche se può alleggerire il vostro portafoglio. Ken