Pagina 3 di 6

Re: Lavori in corso su tm p703

Inviato: 3 gennaio 2011, 3:31
da kjjohnson
This is where we use the Supra Expert caulking on our construction sites - black counter flashing on top of step flashing, caulking seals it to the brickwork. Rained and rained and the toilet is washed away, only the nuts are left. Simon is tired of the rain so he naps a lot. Ken
DSC01960.JPG
DSC01961.JPG
Simon napping.jpg

Re: Lavori in corso su tm p703

Inviato: 3 gennaio 2011, 13:17
da alby4everR
Capito....è molto valido come prodotto....

Grande simon.... beato lui che dorme mentre piove D=_

Re: Lavori in corso su tm p703

Inviato: 3 gennaio 2011, 21:02
da alby4everR
Dopo aver carteggiato molto bene l'interno della cabina, ho carteggiato tutto il veicolo, l'interno cabina arrugginito con della carta vetro grana 80 e una spazzola di ferro, mentre la parte della cabina che aveva ancora vernice bella ho carteggiato con della carta da 280, mentre per l'esterno tutto con carta vetro da 280 mentre il cassone con spazzola e carta vetro da 80, poi ho dato il fermaruggine sul fondo della cabina e sul cassone, poi dopo circa 15 ore ho dato dell'antiruggine...

Ora inizierò a stuccare, poi incarto il tutto e do il fondo....

Re: Lavori in corso su tm p703

Inviato: 4 gennaio 2011, 1:43
da kjjohnson
Good work, keep it up - Ken
Simon drinking from the fish bowl.jpg

Re: Lavori in corso su tm p703

Inviato: 4 gennaio 2011, 13:34
da alby4everR
Grazie ken....spero di fare tutto giusto e nn sbagliare niente, anche perchè non ho mai fatto questo lavoro....solo sempre qualche lavoretto ma mai nulla cosi impegnativo...

Re: Lavori in corso su tm p703

Inviato: 4 gennaio 2011, 19:03
da kjjohnson
You're doing just fine. 'Vespacar Restoration' on my website might help, lots of details even though it's a different model - Ken

Re: Lavori in corso su tm p703

Inviato: 4 gennaio 2011, 21:48
da alby4everR
Grazie!!!

Re: Lavori in corso su tm p703

Inviato: 4 gennaio 2011, 22:56
da mondoape
Lavoro avvincente! ^:)^

Re: Lavori in corso su tm p703

Inviato: 5 gennaio 2011, 12:05
da alby4everR
Grazie mille!!!!!! T(- #3)

Re: Lavori in corso su tm p703

Inviato: 5 gennaio 2011, 19:21
da alby4everR
Finalmente oggi ho dato il fondo......Cavolo mi sono dimenticato di fare le foto dove avevo stuccato :(( 5/%

Re: Lavori in corso su tm p703

Inviato: 5 gennaio 2011, 23:52
da kjjohnson
Looking good - Ken

Re: Lavori in corso su tm p703

Inviato: 6 gennaio 2011, 11:59
da alby4everR
;)

Re: Lavori in corso su tm p703

Inviato: 6 gennaio 2011, 13:03
da kjjohnson
I have a question: Did you lift the edges of the windshield rubber to see if there's rust underneath? You might want to go around the edges with some White Lithium Grease when you're finished. Cleans up easily but will protect the metal. The special tool came from a friend who works at a Windshield Repair Shop - it's plastic, won't harm the paint, has a rounded tip to get under the rubber to lift it up (see Vespacar Restoration on my website for window removal/replacement for a few tips). Inject the grease around the window rubbers as the last thing you do to make sure the paint is well cured. Clean the grease off the paint and the rubbers with Fantastic, works like a charm, the rubbers will look like new. - Ken
Vespacar 216-free the weatherstripping.jpg
Vespacar-rusty edges.jpg
white lithium grease.jpg

Re: Lavori in corso su tm p703

Inviato: 6 gennaio 2011, 15:51
da Minoape
YOU HAVE REALLY EFFECTIVE SOLUTIONS. YOU ARE A SOURCE OF EXPERIENCE VERY IMPORTANT. HELLO HELLO ...
ye:h

Re: Lavori in corso su tm p703

Inviato: 6 gennaio 2011, 23:53
da kjjohnson
L_K* - Maybe it's because I'm getting older. I believe knowledge is to be passed on, I do this every day in my Construction business. The young men who work for us learn the trade and move on usually to start their own business. Then I train the new men who eventually do the same. The restoration of an Ape is similar to the restoration of an old house. It's in the details. Before I start the restoration of a house I ' read the story '. With that I mean I try to understand not only what went into the making of the house but by looking at the details I can tell if it was constructed by craftsmen or not. My first restoration of an Ape was my black P501. It probably took me two months of studying it and ever so slowly taking it apart to see how it was produced and why certain things were used in its production. Simplistic, effective and with good design but like anything, must be maintained. I guess what makes me wonder the most about an Ape is the lack of knowledge other than in Factory Manuals available to us. Probably the times, and the lack of Internet which has brought far reaching owners together. Where are all the Factory trained mechanics and the Dealers who serviced these machines for over 60years? Staring at the sunset I suppose, a bit tired and worn out. I mentioned ' It's in the details ' - the attached photo tells me a lot about the man who went to much effort to create this fine detail and it's much appreciated by one who takes pride in the details of my work. Not everyone will notice, but those who look will, and it will be appreciated. I still have much more to do, but look closely at Aronne's craftsmanship, it's fabulous. 'The Farm' is on my website. 1843 farmhouse restoration. Had been empty for 25 years. Best historical renovation project in my 38 years of this type of work. Have a look. - Ken - http://www.kjjohnson.ca/construction/thefarm.html
It's in the details.jpg
The Farm - start.jpeg
The Farm - almost finished.jpg