Api di Ken

Inserisci le foto e le informazioni del tuo motoveicolo d'epoca (solo anni '50, '60 e '70) / Add you vehicle's photos and info ('50, '60 and '70 only)
Avatar utente
martincontrol
Esperto TM P703
Esperto TM P703
Messaggi: 543
Iscritto il: 28 marzo 2014, 15:09
Ape owned: MPR1

Re: Api di Ken

Messaggio da martincontrol »

Io spesso smonto il coperchio della frizione e faccio girare l' albero della pompa olio con il trapano, dopo un poco di solito arriva l' olio. Parlo del 703, non ricordo se il 601 è uguale.
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

Sì, un trapano funzionerà. Posso far arrivare olio alla pompa e la pompa gira ma non spinge l'olio attraverso il tubo superiore verso il motore. Quindi, devo separarlo e controllare se c'è un blocco o qualcos'altro che non va nella pompa stessa.

- Yes, a drill will work. I can get oil to the pump and the pump turns but doesn't then push the oil through the upper tube to the engine. So - I have to pull it apart and check to see if there's a blockage or something else wrong inside the pump itself. grazie, Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
martincontrol
Esperto TM P703
Esperto TM P703
Messaggi: 543
Iscritto il: 28 marzo 2014, 15:09
Ape owned: MPR1

Re: Api di Ken

Messaggio da martincontrol »

forse olio vecchio secco
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

forse - i pezzi erano rimasti seduti a lungo e abbastanza sporchi e il mio impegno iniziale di pulizia avrebbe potuto perdere un blocco. Lo farò di nuovo. Ora hai un OHMmeter per testare bobina e centralina
IMG_20190305_103430 - Copy.jpg
IMG_20190305_103452 - Copy.jpg
Bits and Pieces
IMG_20190331_105759.jpg
IMG_20190331_113545.jpg
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

CYNTHIA A PROSECCO APE - FINITO: viaggio in B.C. oggi
IMG_20190402_093855.jpg
IMG_20190403_111120.jpg
IMG_20190403_124534.jpg
IMG_20190403_124518.jpg
>:/
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

Ultima modifica di kjjohnson il 13 aprile 2019, 13:29, modificato 1 volta in totale.
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
mondoape
Amministratore
Amministratore
Messaggi: 3506
Iscritto il: 19 marzo 2002, 0:00
Ape owned: AD1

Re: Api di Ken

Messaggio da mondoape »

Very nice! L_K*
Avatar utente
MarioNYC
Apista esperto
Apista esperto
Messaggi: 175
Iscritto il: 11 luglio 2012, 15:06
Ape owned: AD1
Località: Poughkeepsie, NY USA

Re: Api di Ken

Messaggio da MarioNYC »

At this rate your police Ape will be done before I register mine for the road. Great work and inspiration!!!
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

The process will not be short. Still waiting for parts so I can start re-assembly. Between me and the finish line are two more Ape restorations/conversions that will take up my time. I'm in no hurry but will be happy once it's back at my shop so I can continue when I find energy and time. APE BUBBLY is next and a quite short timeline.
IMG_20190412_125956.jpg
APE BUBBLY is receiving a major facelift. The loss of my wife has left me stumbling somewhat and clarity of mind I find is missing - understandable but difficult - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

POLICE APE AD1T ^&$ My Ape AD1T is not the only one brought into the USA that has a clutch pedal. This must have been at the request of the Dealer to Piaggio. The owner has nicely filled in the cabin rear with a metal panel containing a large rear window. Nice touch in my mind and suitable for the weather in Oregon. - Ken
20171121_114737_resized.jpg
Ape2 - Copy.jpg
Ape1.jpg
Ape3.jpg
Ape4.jpg
^&$
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
MarioNYC
Apista esperto
Apista esperto
Messaggi: 175
Iscritto il: 11 luglio 2012, 15:06
Ape owned: AD1
Località: Poughkeepsie, NY USA

Re: Api di Ken

Messaggio da MarioNYC »

The clutch pedal was an accessory that was available with my Ape, as were the doors, which cost $50, and there was no charge to keep the headset clutch control. Brand new out the door the Ape cost $1,250 not including the registration and tax. The cab was delivered later. It would be interesting to know how that was coordinated, as you know the cab bolts together.

You are a stronger man than I am, your work and hobby keep you active.
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

Then I'd like to order 12 brand new AD1T's with doors but minus the foot clutch. All the same color, whatever is available! I'll make up a list of spares I'd like with the order. 8 Pentaro's in the order, 4 of each version. - DREAM ON! - Ken
Pentaro - Birra Italia.jpg
Pentaro - due - Tuscany.jpg
I will have them painted my own colours and apply my logos once they're all here in Bayfield!.
Pentaro - Canada 1.jpg
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
MarioNYC
Apista esperto
Apista esperto
Messaggi: 175
Iscritto il: 11 luglio 2012, 15:06
Ape owned: AD1
Località: Poughkeepsie, NY USA

Re: Api di Ken

Messaggio da MarioNYC »

I gotta find this place in Boston for you then.
Allegati
Italia071a.jpg
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Api di Ken

Messaggio da kjjohnson »

That's a bit of history. Makes me believe the foot clutch was installed at the factory. On the sales sheet was 'No Charge' to install clutch on handlebars. On my Police Ape an aluminum rod was installed with ends smoothed and finish to accept paint and professionally done. It would have had to be removed to install the handlebar clutch cable and have the clutch lever work. The clutch pedal on mine doesn't look like it was locally manufactured. Intriguing.
IMG_20180830_131213a.jpg
IMG_20180830_131224.jpg
IMG_20180727_203146.jpg
IMG_20180727_203222.jpg
^&$
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
MarioNYC
Apista esperto
Apista esperto
Messaggi: 175
Iscritto il: 11 luglio 2012, 15:06
Ape owned: AD1
Località: Poughkeepsie, NY USA

Re: Api di Ken

Messaggio da MarioNYC »

I have the place opposite the brake to mount a clutch pedal, may have been the salesman "sweetening" up the deal by throwing in the already handlebar mounted clutch for free. I just wish mine didn't have that awfully huge back window in it, the smaller one you showed before is perfect.
Rispondi