Rear Suspension & Springs on Piaggio Ape 50CC

Quesiti tecnici riguardanti l'Ape anni '50, '60 e '70 (telai A, B, C, D, E, MP) / Technical questions about Ape in the fifties, sixties and seventies (A, B, C, D, E, MP chassis).
Rispondi
thelittlecoffeevan
Apista aspirante
Messaggi: 1
Iscritto il: 2 aprile 2010, 20:35
Località: London, UK
Contatta:

Rear Suspension & Springs on Piaggio Ape 50CC

Messaggio da thelittlecoffeevan »

We have a 2009 Piaggio Ape 50CC which has been converted into a coffee cart (http://www.thelittlecoffeevan.com). Because of the conversion it is carrying up to 250Kg (in addition to its own weight of 247kg) and the standard manufacturer's rear shock absorbers and springs cannot do the job, so the ride height has dropped very close to the rear wheels.

Has anyone replaced their springs and shock absorbers with something stronger that can carry this kind of weight without dropping? Any ideas where we can get upgraded springs or exactly what we need to ask for? (We're based in the UK)

Thanks

Paul
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Rear Suspension & Springs on Piaggio Ape 50CC

Messaggio da kjjohnson »

Paul: Best to look into air shocks, often used by hot rod folks, and I had them on my Honda Gold Wing. With a mini air compressor you can adjust the ride height and compression of the shocks under load. The control would be mounted in the cabin and you make adjustments prior to moving out. Make sure before you do this you don't take off too quickly or you'll wind up on your butt!
Overloaded!.jpg
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
neweycoffee
Apista aspirante
Messaggi: 2
Iscritto il: 11 luglio 2018, 22:09

Re: Rear Suspension & Springs on Piaggio Ape 50CC

Messaggio da neweycoffee »

Hi - I read your post and wondered what you eventually did re suspension?
I've recently bought an Ape 50 that's been decked out as a coffee van and am having the same problem/concern! Also in UK!
Any help/advice would be hugely appreciated! Georgina
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Rear Suspension & Springs on Piaggio Ape 50CC

Messaggio da kjjohnson »

I work on the bigger Ape's - different kettle of fish than an Ape 50. Best contact Tukxi.com as they do conversions and would be the best to give advice/help. Not designed for the weight you're carrying. I have a hard time keeping my clients from overloading their Ape. Suspension is different and cargo rated tires help as well as new rubber bumpers for the rear suspension. Keep weight as far forward as possible if unable to lighten the load - Ken
36712757_2204413946502415_6103817786599931904_n.jpg
^&$
Ultima modifica di kjjohnson il 12 luglio 2018, 0:03, modificato 1 volta in totale.
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
neweycoffee
Apista aspirante
Messaggi: 2
Iscritto il: 11 luglio 2018, 22:09

Re: Rear Suspension & Springs on Piaggio Ape 50CC

Messaggio da neweycoffee »

Hi Ken - thank you, I’ll try Tukxie ... and get back in touch with you when I decide to throw in the towel on the 50 and get a bigger one!!!
Thank you - Georgina
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Rear Suspension & Springs on Piaggio Ape 50CC

Messaggio da kjjohnson »

Consider a trailer - Ken
Ape 50 with trailer de5.JPG
^&$
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Rispondi