Api di Ken

Inserisci le foto e le informazioni del tuo motoveicolo d'epoca (solo anni '50, '60 e '70) / Add you vehicle's photos and info ('50, '60 and '70 only)
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: api di ken

Messaggio da kjjohnson »

No, she's still recovering from surgery. The fourth person to lift it on is me, and I'm the one taking the photos. Must turn the camera around one day. Some foam insulating tape under the lip and the front of the pianale bed. When you have problems installing a nut onto a bolt in a very tight spot, I use double sided Carpet Tape and cut a small square and stick the nut to the tape and the tape onto the end of my finger (either side depending on location). Instead of installing (or trying to) a lockwasher I often use nuts with serrated washers attached. Works real slick in tight places! And yes, I'll touch up that spot on the pianale lock. Ken
DSC09292.JPG
DSC09293.JPG
DSC09294.JPG
DSC09295.JPG
DSC09296.JPG
DSC09297.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: api di ken

Messaggio da kjjohnson »

Advertised for 12,000 euros - a P601 from Sicily - Look at the floor! Ken
P601 Sicily 1980 a.jpg
P601 Sicily 1980 b.jpg
P601 Sicily 1980 c.jpg
P601 Sicily 1980 d.jpg
P601 Sicily 1980 e.jpg
P601 Sicily 1980 f  12,000e.jpg
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: api di ken

Messaggio da kjjohnson »

OK kids - here she is - "Sweet Pea". The topper is mounted. The black pieces on the upright posts are Industrial Strength Velcro which I used as a fastener for the three doors. No sense putting locks on it because the Pianale bed sides and tailgate can be unfastened. The props to hold up the three doors are aluminum rod which sit in holes drilled in the uprights and the doors are hinged with aluminum piano hinges. I have to clean up the aluminum and then the logo's can be put on. Ken
DSC09309.JPG
DSC09314.JPG
DSC09315.JPG
DSC09316.JPG
DSC09317.JPG
DSC09318.JPG
DSC09322.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: api di ken

Messaggio da kjjohnson »

A personal touch - Ken
DSC09330.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
olandese volante
Apista veterano
Apista veterano
Messaggi: 1942
Iscritto il: 20 maggio 2007, 18:17
Ape owned: AC3
Località: olanda/apiro(mc)

Re: api di ken

Messaggio da olandese volante »

about time..............
:D
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: api di ken

Messaggio da kjjohnson »

Yes, yes, you with the smiling face. One door logo on tonight but the Master is coming tomorrow or Friday to put all the rest of the logo's on. (the Master is Pete and this is where they came from). I had a short drive around the subdivision behind us and how appropriate one of the streets is named "Sweetgrass Street". Ken
DSC09343.JPG
DSC09345.JPG
DSC09346.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
antonio
Apista apprendista
Apista apprendista
Messaggi: 35
Iscritto il: 11 agosto 2009, 15:05

Re: api di ken

Messaggio da antonio »

Da vero bella!!!!!!!!!
Ciao sapresti dirmi se il cassone dell'ape 501 si può smontare ?
Se si come???????
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: api di ken

Messaggio da kjjohnson »

6 bolts, two on each side on the pianale bed and two on the uprights at the front of the pianale bed. Undo those 6 bolts and lift it off. I used the bolt holes for the front spars on each side which hold the pianale bed to the frame. The only new holes are behind the corners of the front upright panel and they're hidden from view. Here are some more photos showing how it's attached. Ken
DSC09296.JPG
DSC09355.JPG
DSC09361.JPG
DSC09362.JPG
Ultima modifica di kjjohnson il 11 settembre 2009, 3:04, modificato 2 volte in totale.
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
zamik
Apista veterano
Apista veterano
Messaggi: 376
Iscritto il: 4 maggio 2005, 19:47
Ape owned: AC2
Località: Chievo - Verona
Contatta:

Re: api di ken

Messaggio da zamik »

si che si può smontare, bisogna levare i bulloni che lo tengono ataccato ai longheroni. Se guardi da sotto il pianale vedrai delle sbarre tenute da viti e bulloni che fissano il pianale ai longheroni. allego tavole del catalogo p.r.
Allegati
telaio tavvii.JPG
pianalexxiv.JPG
Avatar utente
antonio
Apista apprendista
Apista apprendista
Messaggi: 35
Iscritto il: 11 agosto 2009, 15:05

Re: api di ken

Messaggio da antonio »

Magiciiii tutti e due grazie per le vostre risposte........
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: api di ken

Messaggio da kjjohnson »

The second "topper" is going to Toronto and I'm to mount it on their Vespacar P501. You can see it on their website, it's MPR2T+25088+ - http://www.olliffe.ca/ - Ken
DSC08093.JPG
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
olandese volante
Apista veterano
Apista veterano
Messaggi: 1942
Iscritto il: 20 maggio 2007, 18:17
Ape owned: AC3
Località: olanda/apiro(mc)

Re: api di ken

Messaggio da olandese volante »

but when are the api with (maple leaf)pianale kits appearing?
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: api di ken

Messaggio da kjjohnson »

That would be at the opening of Hockey season! - you make me giggle and I thank you for that. Things still pretty tough around home, very slow recovery. Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: api di ken

Messaggio da kjjohnson »

A friend has advised me that in the .pdf file on my website "Catalogo delle parti di ricambio P2'' I seem to be missing pages 57 and 58. I wonder if someone who has this Manual can provide me with copies of these two pages so I can correct the file. grazie, Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
Avatar utente
olandese volante
Apista veterano
Apista veterano
Messaggi: 1942
Iscritto il: 20 maggio 2007, 18:17
Ape owned: AC3
Località: olanda/apiro(mc)

Re: api di ken

Messaggio da olandese volante »

nurnberg ........
Rispondi