Restauro P601

Inserisci le foto e le informazioni del tuo motoveicolo d'epoca (solo anni '50, '60 e '70) / Add you vehicle's photos and info ('50, '60 and '70 only)
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Restauro P601

Messaggio da kjjohnson »

spray some undercoating inside the center tunnel when you're finishing, it will protect that part of the floor from rusting on the inside where moisture collects - Ken

spruzzare un po 'di mano di fondo all'interno del tunnel centrale quando si sta finendo, proteggerà la parte del pavimento dalla ruggine all'interno dove l'umidità raccoglie - Ken
fluid film.jpg
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
deruky
Apista novizio
Apista novizio
Messaggi: 90
Iscritto il: 29 dicembre 2013, 13:43
Località: brescia
Contatta:

Re: Restauro P601

Messaggio da deruky »

Una domanda :la struttura anteriore dove si fissa il parafango e dove c'è la forcella del modello calessino e del p601 sono diversi come forma della carrozzeria?ho comprato il parafango del modello calessino ma la forma in confronto alla sagoma nella lamiera e' molto differente.qualcuno ha già fatto una modifica del genere?avete una foto del calessino senza parafango ?grazie mille
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Restauro P601

Messaggio da kjjohnson »

Start here and you will see what we've done in a series of photos of my current restoration - Ken - http://www.kjjohnson.ca/piaggio/APE%20P ... entPic=348 - keep hitting the 'back' button to see how the front was finished.
-
Inizia qui e vedrete quello che abbiamo fatto in una serie di foto della mia attuale restauro - Ken
ape 358.jpg
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
deruky
Apista novizio
Apista novizio
Messaggi: 90
Iscritto il: 29 dicembre 2013, 13:43
Località: brescia
Contatta:

Re: Restauro P601

Messaggio da deruky »

la verniciatura F<)
Allegati
020.JPG
014.JPG
015.JPG
019.JPG
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Restauro P601

Messaggio da kjjohnson »

:)>- -Ken V(*
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
deruky
Apista novizio
Apista novizio
Messaggi: 90
Iscritto il: 29 dicembre 2013, 13:43
Località: brescia
Contatta:

Re: Restauro P601

Messaggio da deruky »

è possibile ridurre di poco lo sterzo del p601?approfitto per fare gli auguri di buona pasqua a tutti
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Restauro P601

Messaggio da kjjohnson »

Expain what you mean by - ridurre di poco lo sterzo ?Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
deruky
Apista novizio
Apista novizio
Messaggi: 90
Iscritto il: 29 dicembre 2013, 13:43
Località: brescia
Contatta:

Re: Restauro P601

Messaggio da deruky »

Dovendo adattare al p601 il parafango del modello calessino,dovrei fare in modo che quando lo sterzo gira,la forcella non vada a toccare nel parafango
Avatar utente
kjjohnson
1° Apista restauratore
1° Apista restauratore
Messaggi: 6141
Iscritto il: 3 dicembre 2007, 11:17
Ape owned: MPR2
Località: Bayfield, Ontario, Canada
Contatta:

Re: Restauro P601

Messaggio da kjjohnson »

Il piantone dello sterzo non deve toccare il parafango. Credo che alcuni se non tutti i fori di montaggio sarà lo stesso, ma solo se hai il nuovo parafango nelle vostre mani si sarà in grado di dire. Utilizzare nastro per tenerlo a posto prima di montare il parafango principale. - Ken
we buy/restore/sell P501 and P601s and parts/manuals/handbooks
http://www.kjjohnson.ca/
deruky
Apista novizio
Apista novizio
Messaggi: 90
Iscritto il: 29 dicembre 2013, 13:43
Località: brescia
Contatta:

Re: Restauro P601

Messaggio da deruky »

buona sera a tutti...a breve riprendero il mio restauro dopo una pausa causa lavoro L()
Avatar utente
Luca88SD
Apista esperto
Apista esperto
Messaggi: 228
Iscritto il: 28 ottobre 2013, 20:46
Località: Siurgus Donigala (CA)
Contatta:

Re: Restauro P601

Messaggio da Luca88SD »

Molto bene ti seguo anche io :) complimenti per quello fatto sino ad ora ;)
deruky
Apista novizio
Apista novizio
Messaggi: 90
Iscritto il: 29 dicembre 2013, 13:43
Località: brescia
Contatta:

Re: Restauro P601

Messaggio da deruky »

L_K*
deruky
Apista novizio
Apista novizio
Messaggi: 90
Iscritto il: 29 dicembre 2013, 13:43
Località: brescia
Contatta:

Re: Restauro P601

Messaggio da deruky »

i lavori sono ricominciati,oggi ho adattato il parafango nuovo,dopo qualche modifica,e ho inserito il clacson cromato nella griglia F<)
Allegati
10616607_704018102987337_263451976786661051_n.jpg
10622730_704018119654002_7923094694891869672_n.jpg
10405450_336418283202891_2406695758192436753_n.jpg
Avatar utente
Luca88SD
Apista esperto
Apista esperto
Messaggi: 228
Iscritto il: 28 ottobre 2013, 20:46
Località: Siurgus Donigala (CA)
Contatta:

Re: Restauro P601

Messaggio da Luca88SD »

Perfetto :) perchè adattato?
deruky
Apista novizio
Apista novizio
Messaggi: 90
Iscritto il: 29 dicembre 2013, 13:43
Località: brescia
Contatta:

Re: Restauro P601

Messaggio da deruky »

Perché essendo un p601 quel tipo di parafango va modificato altrimenti non va bene
Rispondi