Aiuti e consigli per far rivivere il mio mp 600

Inserisci le foto e le informazioni del tuo motoveicolo d'epoca (solo anni '50, '60 e '70) / Add you vehicle's photos and info ('50, '60 and '70 only)
TonyM
Apista apprendista
Apista apprendista
Messaggi: 32
Iscritto il: 1 novembre 2012, 15:10
Ape owned: MPV1

Aiuti e consigli per far rivivere il mio mp 600

Messaggio da TonyM »

Salve a tutti
Eccomi qui sono nuovo del forum e sono qui perchè ho bisogno di tutti voi che avete effettuate il restauro della vostra apetta, a darmi una mano, visto che non sono molto pratico, ho bisogno dei vostri consigli e delle vostre esperienze, per poter far tornare alla luce e far risplendere il mio ape mp 600 perchè vederlo cosi mi far star davvero male =( dopo tutto quello che ha fatto per noi è doveroso farlo risplendere, e voglio riuscirmi con le mie forze!!!
Spero che mi possiate aiutare.
Grazie antipatamente.
Queste sono delle foto del mio gioello:
Immagine
eccolo in vista frontale
Immagine
parafango anteriore danneggiato
Immagine

Immagine
Immagine
porta legata col filo di ferro
Immagine
Immagine
Immagine
decisamente rovinato
Immagine
Immagine
Immagine
danneggiato
Immagine
tutta ruggine g%7 g%7
Immagine
    restaurare il mio Ape: il mio obiettivo!!
    Avatar utente
    kjjohnson
    1° Apista restauratore
    1° Apista restauratore
    Messaggi: 6142
    Iscritto il: 3 dicembre 2007, 11:17
    Ape owned: MPR2
    Località: Bayfield, Ontario, Canada
    Contatta:

    Re: Aiuti e consigli per far rivivere il mio mp 600

    Messaggio da kjjohnson »

    Well, well, well, it has been a workhorse. This is not going to be easy but when the day comes and you have finished the restoration you will be able to celebrate for sure. Do you have room to store the cassone once removed? It will be one of the last major items to go back on the vehicle and will allow you access to the motor and frame and rear suspension. It's the first thing I would remove and set aside.
    I suggest you go through the restoration photo files on my website, they will give you an idea of the process. You must take notes when you remove parts of what will need replacing. Try and get it running so you can do some tests on the motor but I'm sure it's going to need an overhaul.
    Make a list of the parts you'll need to replace. Lift out the floor mats and take some photos of the cabin floor and photos of the motor when you've removed the cover in the cassone. - Ken

    Bene, bene, bene, è stata un cavallo di battaglia. Questo non sta per essere facile, ma quando arriva il giorno e avete finito il restauro sarà in grado di celebrare di sicuro. Avete spazio per memorizzare il cassone rimosso una volta? Sarà uno degli elementi principali di ultimi tornare sul veicolo e consentirà il che accesso al motore e telaio e sospensione posteriore. È la prima cosa che vorrei togliere e mettere da parte.
    Vi suggerisco di passare attraverso i file di ripristino foto sul mio sito, che vi darà un'idea del processo. Devono prendere appunti quando si rimuovono le parti di ciò che sarà necessario sostituire. Cercare di farlo funzionare, così si possono fare alcuni test sul motore, ma sono sicuro che sta andando ad avere bisogno di una revisione.
    Fare un elenco delle parti che sarà necessario sostituire. Sollevare i tappetini e prendere alcune foto del pavimento di cabina e del motore quando hai rimosso il coperchio nel cassone. -Ken
    DSC07607.JPG
    P501 Vespacar MPR2T+25090+.jpg
    we buy/restore/sell P501 and P601s and parts/manuals/handbooks
    http://www.kjjohnson.ca/
    TonyM
    Apista apprendista
    Apista apprendista
    Messaggi: 32
    Iscritto il: 1 novembre 2012, 15:10
    Ape owned: MPV1

    Re: Aiuti e consigli per far rivivere il mio mp 600

    Messaggio da TonyM »

    bene bene allora queste sono le prime cose che faró. smonteró il cassone tramite i due perni sotto giusto?? il motore parte e l' ape comunque cammina ha bisogno di una revisione. invece per quanto riguarda la cabina la parte sotto c'è solo ruggine con delle foto ti faró vedere e mi consiglierai cosa fare..poi da dove altro posso iniziare?? di che strumenti avrei bisogno per il restauro della carrozzeria??
      restaurare il mio Ape: il mio obiettivo!!
      Avatar utente
      kjjohnson
      1° Apista restauratore
      1° Apista restauratore
      Messaggi: 6142
      Iscritto il: 3 dicembre 2007, 11:17
      Ape owned: MPR2
      Località: Bayfield, Ontario, Canada
      Contatta:

      Re: Aiuti e consigli per far rivivere il mio mp 600

      Messaggio da kjjohnson »

      what does the word 'smontero' mean? Doesn't translate. Ken
      we buy/restore/sell P501 and P601s and parts/manuals/handbooks
      http://www.kjjohnson.ca/
      TonyM
      Apista apprendista
      Apista apprendista
      Messaggi: 32
      Iscritto il: 1 novembre 2012, 15:10
      Ape owned: MPV1

      Re: Aiuti e consigli per far rivivere il mio mp 600

      Messaggio da TonyM »

      kjjohnson ha scritto:what does the word 'smontero' mean? Doesn't translate. Ken
      first thing to do: body by removing the two bolts under.
        restaurare il mio Ape: il mio obiettivo!!
        Avatar utente
        kjjohnson
        1° Apista restauratore
        1° Apista restauratore
        Messaggi: 6142
        Iscritto il: 3 dicembre 2007, 11:17
        Ape owned: MPR2
        Località: Bayfield, Ontario, Canada
        Contatta:

        Re: Aiuti e consigli per far rivivere il mio mp 600

        Messaggio da kjjohnson »

        There are 17 bolts and screws that must be removed to take the cassone off the frame, including one at the front of the gas tank. Here's a photo showing their locations. Remove the cassone side panels and tailgate before you start. Ken

        Ci sono 17 bulloni e viti che devono essere rimosso per prendere il cassone fuori la cornice, tra cui uno nella parte anteriore del serbatoio del gas. Ecco una foto che le loro posizioni. Rimuovere i pannelli laterali cassone e portellone prima di iniziare. Ken
        118-bed attachments-marked.jpg
        119- rear frame bolts.jpg
        120-rear frame bolts 2.jpg
        121- rear side frame bolts.jpg
        122-back of frame bolts.jpg
        HAVE A LOOK AT THIS - http://www.kjjohnson.ca/piaggio/vespaca ... ration.php -
        we buy/restore/sell P501 and P601s and parts/manuals/handbooks
        http://www.kjjohnson.ca/
        TonyM
        Apista apprendista
        Apista apprendista
        Messaggi: 32
        Iscritto il: 1 novembre 2012, 15:10
        Ape owned: MPV1

        Re: Aiuti e consigli per far rivivere il mio mp 600

        Messaggio da TonyM »

        kjjohnson ha scritto:There are 17 bolts and screws that must be removed to take the cassone off the frame, including one at the front of the gas tank. Here's a photo showing their locations. Remove the cassone side panels and tailgate before you start. Ken

        Ci sono 17 bulloni e viti che devono essere rimosso per prendere il cassone fuori la cornice, tra cui uno nella parte anteriore del serbatoio del gas. Ecco una foto che le loro posizioni. Rimuovere i pannelli laterali cassone e portellone prima di iniziare. Ken
        118-bed attachments-marked.jpg
        119- rear frame bolts.jpg
        120-rear frame bolts 2.jpg
        121- rear side frame bolts.jpg
        122-back of frame bolts.jpg
        HAVE A LOOK AT THIS - http://www.kjjohnson.ca/piaggio/vespaca ... ration.php -
        molto bene grazie ken questo sarà il mio primo passaggio da effettuare..quasi completato.
          restaurare il mio Ape: il mio obiettivo!!
          TonyM
          Apista apprendista
          Apista apprendista
          Messaggi: 32
          Iscritto il: 1 novembre 2012, 15:10
          Ape owned: MPV1

          Re: Aiuti e consigli per far rivivere il mio mp 600

          Messaggio da TonyM »

          una volta smontato il cassone procedo con scartavetrare il tutto con carta abrasiva di che tipo? fatta uscire la lamiera fuori che bisogna passare sopra la lamiera? come è possibile rimuovere tutte le bozze e tutte le parti danneggiate dalla ruggine? il bicomponente per cosa viene usato? grazie
           
            restaurare il mio Ape: il mio obiettivo!!
            Avatar utente
            kjjohnson
            1° Apista restauratore
            1° Apista restauratore
            Messaggi: 6142
            Iscritto il: 3 dicembre 2007, 11:17
            Ape owned: MPR2
            Località: Bayfield, Ontario, Canada
            Contatta:

            Re: Aiuti e consigli per far rivivere il mio mp 600

            Messaggio da kjjohnson »

            I need to see what it is you wish to prepare for painting, I'm pretty far away - Ken s%£

            Ho bisogno di vedere che cosa si che desidera preparare per la pittura, io sono abbastanza lontano - Ken s%£
            we buy/restore/sell P501 and P601s and parts/manuals/handbooks
            http://www.kjjohnson.ca/
            TonyM
            Apista apprendista
            Apista apprendista
            Messaggi: 32
            Iscritto il: 1 novembre 2012, 15:10
            Ape owned: MPV1

            Re: Aiuti e consigli per far rivivere il mio mp 600

            Messaggio da TonyM »

            kjjohnson ha scritto:I need to see what it is you wish to prepare for painting, I'm pretty far away - Ken s%£

            Ho bisogno di vedere che cosa si che desidera preparare per la pittura, io sono abbastanza lontano - Ken s%£
            non ho capito. perchè la pittura?
              restaurare il mio Ape: il mio obiettivo!!
              Avatar utente
              kjjohnson
              1° Apista restauratore
              1° Apista restauratore
              Messaggi: 6142
              Iscritto il: 3 dicembre 2007, 11:17
              Ape owned: MPR2
              Località: Bayfield, Ontario, Canada
              Contatta:

              Re: Aiuti e consigli per far rivivere il mio mp 600

              Messaggio da kjjohnson »

              Senza foto che non riesco a vedere, che io sono troppo lontano, sono da altra parte del mondo. Io sono di 7400 km dalla vostra Ape - Ken

              Without photos I cannot see, I'm too far away, I'm on the other side of the World. I'm 7400km from your Ape. - Ken
              we buy/restore/sell P501 and P601s and parts/manuals/handbooks
              http://www.kjjohnson.ca/
              TonyM
              Apista apprendista
              Apista apprendista
              Messaggi: 32
              Iscritto il: 1 novembre 2012, 15:10
              Ape owned: MPV1

              Re: Aiuti e consigli per far rivivere il mio mp 600

              Messaggio da TonyM »

              kjjohnson ha scritto:Senza foto che non riesco a vedere, che io sono troppo lontano, sono da altra parte del mondo. Io sono di 7400 km dalla vostra Ape - Ken

              Without photos I cannot see, I'm too far away, I'm on the other side of the World. I'm 7400km from your Ape. - Ken
              hai perfettamente ragione, scusa!! allora domani faccio le foto e le pubblico.
                restaurare il mio Ape: il mio obiettivo!!
                Avatar utente
                kjjohnson
                1° Apista restauratore
                1° Apista restauratore
                Messaggi: 6142
                Iscritto il: 3 dicembre 2007, 11:17
                Ape owned: MPR2
                Località: Bayfield, Ontario, Canada
                Contatta:

                Re: Aiuti e consigli per far rivivere il mio mp 600

                Messaggio da kjjohnson »

                If I was standing beside you it would be easier to explain to you - Ken

                Se ero in piedi accanto a te che sarebbe più facile spiegare a voi - Ken
                077.jpg
                we buy/restore/sell P501 and P601s and parts/manuals/handbooks
                http://www.kjjohnson.ca/
                TonyM
                Apista apprendista
                Apista apprendista
                Messaggi: 32
                Iscritto il: 1 novembre 2012, 15:10
                Ape owned: MPV1

                Re: Aiuti e consigli per far rivivere il mio mp 600

                Messaggio da TonyM »

                kjjohnson ha scritto:If I was standing beside you it would be easier to explain to you - Ken

                Se ero in piedi accanto a te che sarebbe più facile spiegare a voi - Ken
                077.jpg
                se eri qui tu era perfetto...tutti i tuoi consigli la tua esperienza! io però ci sto lavorando! ora ti faccio vedere il mio lavoro:
                smontato cassone + sponde
                smontato parafango anteriore + frecce
                smontato sedile vecchio
                prossimo lavoro da effettuare??
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                Immagine
                come riparo tutta la ruggine?
                e i buchi?
                  restaurare il mio Ape: il mio obiettivo!!
                  Avatar utente
                  kjjohnson
                  1° Apista restauratore
                  1° Apista restauratore
                  Messaggi: 6142
                  Iscritto il: 3 dicembre 2007, 11:17
                  Ape owned: MPR2
                  Località: Bayfield, Ontario, Canada
                  Contatta:

                  Re: Aiuti e consigli per far rivivere il mio mp 600

                  Messaggio da kjjohnson »

                  The next thing you do is to remove both doors and take photos of them, inside and out, especially the bottoms of the doors so I can see how much rust there is. What shape are the hinges in? Then you should pull the floor mat and take photos of the floor in the cabin so we can see how much rust you have to deal with there. Now is also the time to wash the rear of the Ape so you can concentrate on the mechanicals. This Ape has seen a very rough life. Ken

                  La prossima cosa da fare è rimuovere entrambe le porte e prendere le foto di loro, dentro e fuori, specialmente i fondelli delle porte così posso vedere quanta ruggine c'è. Ciò che forma sono le cerniere in? Poi si dovrebbe tirare il tappeto e prendere le foto del pavimento nella cabina così possiamo vedere quanta ruggine devi affrontare lì. Ora è anche il momento di lavare la parte posteriore della scimmia, così ci si può concentrare sulla meccanica. Questa scimmia ha visto una vita molto approssimativa. Ken
                  we buy/restore/sell P501 and P601s and parts/manuals/handbooks
                  http://www.kjjohnson.ca/
                  Rispondi